600x2400x5mm EVA Foam Faux Teak Boat Deck Mat Brown Decking Sheet Yacht Flooring Anti Skid Mat Self Adhesive Vehicle Pad
This Sheet Material measures 600mm by 2400mm. It comes as a sheet of 5mm thick non-absorbent EVA foam material. Purchasing a Large Sheet of uncut gives you the ability to either use whole, or custom cut to your specific needs using a sharp razor knife. Another great feature of this full sheet is that the entire sheet is backed with a pressure-sensitive adhesive that allows for an easy peel and sticks application. Customize the look of your boat while adding function. The padding not only looks good but is comfortable, non-skid, acts as an anti-fatigue mat, and also has sound dampening characteristics. That is important for fishermen that don’t want to scare away the next big catch. The EVA foam material is designed for everyday use, holds up to abuse, and is easy to clean with a stiff brush and soapy water. Use this roll along with other pads to complete the look of your project!
Formulated with acrylic-based high-bond pressure-sensitive adhesive, robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain-resistant, it also provides protection for boat surfaces, especially in high-traffic areas.
Features:
-Non-skid EVA Foam Sheets provide exceptional traction even when wet
-Unparalleled comfort when standing, walking, or leaning on boat surfaces
-Shock absorption, which decreases fatigue
-Protection for boat surfaces against scratches, chips, and dents
-Noise reduction characteristics, ideal for fishermen
Specification:
Material: EVA
Color: As shown
Size: 2400mm X 600mm X 5mm (94.49″ X 23.62″ X 0.2″ )
Hardness: 50-55 degree
Glue: Strong 3M glue on the back
Remark: Size can be customized
Package Include:
1 x Boat Decking Mat
Sheet Material Installation Instructions:
The only items you’ll need for your installation should be a sharp razor blade, masking tape, window cleaner, and a clean cloth.
Thoroughly clean the area where it will be applied. We recommend using a cleaner that will not leave any residue. A glass cleaner used with a clean cloth or scotch-bright pad works well. Make sure the area is completely dry before applying the pad.
If there is any glue, grease, adhesive, or other substances on the area where the pads are to be applied, mineral spirits followed by acetone may be used to remove them. Be sure to use a glass cleaner afterward as suggested above. Again the platform surface must be completely dry before applying the pad.
If pads are being applied to a new boat right from the factory it is very important that all mold release is thoroughly removed from the boat surface. Be sure to check with the boat manufacturer before applying the pads. Arrange the pad to the exact location to be covered and verify proper fit and placement. Once you are sure the pad is the right size and are happy with the location turn the pad over so that the paper backing is facing up. With a sharp razor, carefully cut the paper backing right down the center being careful not to cut into the pad. From the center, peel up each side a little to make sure the backing is completely cut all the way through.
Turn the pad back over and reposition the pad exactly where you want it to be installed. Firmly secure one side of the pad to the platform using two-inch masking tape.
Now lift up the untapped side of the pad with one hand and loosen the paper backing with the other. This process is a little easier if you have someone to help you out. Slowly and carefully pull up the rest of the backing while applying the pad to the platform. Use your hand to apply pressure to the pad to assure a firm bond between the pad and the platform. Now remove the tape from the other side of the pad and repeat the application process just like you did on the first side. Take time to press the entire pad into place with your hands, especially around the edges of the pad.
Notice:
1. Please allow 1-5mm error due to manual measurement.
please make sure you do not mind before you bid.
2. The colors may have different as the difference displayed, please understand.
Reviews
There are no reviews yet.