Remote Control 4CH Car Key Garage Door Gate Opener Duplicator Universal Copy Garage Door Car CAME RemotesC

Advantages and characteristics:

This automatic door wireless intelligent receiving controllercan meet the requirements of automatic opening andclosing, normal opening, half opening, and full locking forthe door to be controlled. This product has thecharacteristics of stable performance, small size, and highreception sensitivity.

operationmode

A.Automatic: The door can automatically sense entry andexit

B.Normally open: The door remains fully open

C.Half open: The door remains half open.

D. Fully locked: The door remains closed

Learning operation: Press the learning button once, andthen press any key on the remote control to match

Product Name:Metal Sliding Cover Copy Remote Control

Specification:

Working voltage:6V

Product size:54.5×29.5mm

Working frequency:315MHz/433MHZ

EncodingType:Copy

Modulation method: ASK

Working current:11MA

Transmission speed:50-60KHZ

Emission distance:50-100m

Transmission power: 10-15mW

Data dump:

When pressing the A and B buttons at the same time, the LEDindicator light will stay on for 1 second and start flashing. Afterreleasing the clear function, it indicates that all the stored data ofthe buttons has been cleared. lf this operation is not completedthe above operation can be repeated to clear it once. After theclear function is completed, pressing any key will flash oncepressing the button without data will flash once and pressing thebutton with data will send data with the LED indicator lightconstantly on.

Attention: The original remote control on hand cannot performcode clearing operation!

One on one copy:

After completing the clearing function, you can learn one-on-onekeys by placing the copy remote control and the copied remotecontrol together. At the same time, press the copy remote controand the copied remote control object buttons. At this time, thecopy remote control LED indicator light starts to flash and releaseindicating that the one-on-one keys have been successfully copieoCopying other keys in sequence can repeat the above operation tocomplete. The copy remote control and the copied remote controshould be as close as possible to each other, which can reduce theerror of copied data bits and oscillation resistance and improvecopy accuracy. After successful copying, press the button againand the LED indicator light will remain on, and the remote controlcopy code can be sent out.

Data permanent protection:

Press the A and D buttons or the B and C buttons (diagonalbuttons) at the same time, and the LED indicator lights will remainon for 1 second before flashing and releasing. At this time, thedata codes of the four buttons will be permanently stored in thechip. lf all data is cleared in the remote control, function 5 can beexecuted to restore the saved remote control code. If the data issaved again, it will replace the last saved data code, and so on.Ifthere are important remote control codes, it is recommended touse this function. At any time, only function 5 needs to beexecuted to restore.

Notice

xImages on this page are for illustration only and the design of the actual product may differ.

xAll data on this page are from laboratories, actual results may vary according to differences in software version, environment and phone edition.

xChannel availability may vary between markets. Local standards and laws may vary, please ensure this product meets local requirements before purchasing.