433mhz Remote Control Key Garage Door Copy Controller Electric Universal Gate Garage Door for PT2262 PT2264 SC2262 SC2260

1pc For 433mhz Remote Control Key garage door copy controller Electric Universal Gate Garage Door Remote Control

Note :
Because the remote control only applies to the following chip models
You can open the old remote control to check the chip model before buying
If the model is not confirmed
We do not accept disputes
If there is a dispute, you need to provide the chip model of the old remote control

Please confirm
Condition I: the original remote control may be used normally
Condition II: know the transmission frequency of original remote control (referring to the following diagram)
Condition III: IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code.
IC model of original remote control is 2262 2260 1527 2240 and compatible IC
It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code.
only support static code, does not support dynamic code.

inapplicable
The inapplicable IC is HCS300 30 and compatible rolling code
It's very very important. Don't ingnore them.
Don't simple think the frequeny is same then it can be copied.It's not true.

Features:
With this remote cloner you can clone all 433.92MHz fixed code key fobs. Some remotes that use this frequency are listed below. This is not a complete list! If your remote uses the 433.92MHZ frequency it will work with the remote duplicator (note: rolling code remotes will not work)
Specifications:
Operating frequency: 433.92MHz
The battery used in the product is 12V and 23 A(not includ). please replace the battery when the remote control distance is insufficient
Size: 55mm x 28mm x 14mm
Distance: Up to 100 meters

How to use:
1. Clear code
Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful
2. Mutual-Duplicating
Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.
Tips: if you reset the code of remote control and want to recover, press two keys

Package included:
1×Remote Control
Note:We don't offer retail package,but we will pack it well before shipped out.