Product Description:
Product Name: Electric drill round rod Dowel Maker
Round hole specification: 8/9/10/12/18/18/20 (mm)
Product material: CNC aluminum alloy/anodized treatment
Blade material: hard alloy blade
Blade specification: 15 x 15 x 2.5 30 ° R150
Product size: 85 x 50 x 80mm
Packaging:
As shown:1 x Electric drill round rod Dowel Maker
As shown:1 x Blade
As shown:10 x Blade
Notes:
1. Manual measurement, please wait for an error of 1-3cm. Thank you.
2. Due to the differences between different displays, the images may not reflect the actual color of the item. We guarantee that the style is the same as shown in the picture.
Due to the long transportation time, the item may be damaged during transportation. If the item is damaged, please contact us immediately before leaving feedback. Thank you for your support
Q1: Is the wooden stick coming out of the car smooth?
A1: The principle of the product is similar to that of a turning tool, and it needs to be sanded after turning.
Q2:Will polishing make the size smaller?
A2:The turning hole is 0.05mm larger than the marked aperture. For polishing and polishing allowance, there is no need to worry about reducing the polishing size.
Q3:What are the usage steps?
A3: (1) Material preparation: When cutting, try to cut into square materials as much as possible,
(2) After tightening, place the wooden board close to the cutting tool and first cut the pointed end of the board to a rough shape. Then, slowly walk along the edge of the module.
Q4: What are the precautions to pay attention to during use?
A4: (1) It should be used on workbenches such as inverted electric wood milling.
(2) A trimming knife with a bearing on the top should be used.
(3) Before use, it is necessary to adjust the height of the milling cutter and observe whether the milling
Reviews
There are no reviews yet.