Item Description:
Cleat Port RIB Mount Bringing the Functionality of the CleatPort to your PVC or Hypalon Inflatable boat. It’s a simple idea, but very effective. Now your cleat can hold your fishing rod, mobile phone, drink, navilight, or anything else that a boat accessory can hold.The Cleat gives you a tie off point for stern lines and bow lines on small craft. The Port gives the extra functionality of adding accessories.
1. Drill holes using the backing plate as a guide.
2. Stack plate and cleat in place then fit the two M6x25 screws in the two holes in line with the cleat handles.
3. Tighten nuts or screw heads to a firm tension.
4. Position the cleat on top lining the holes up with the two spare holes on the Cleat and fit the two M6x35 screws
– Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.
Package:
1 Piece Kayak Cleat Port
Note:
Please allow slightly difference due to manual measurement. Color may be slightly different since different monitor. Thanks!
Details Pictures:
Reviews
There are no reviews yet.