DC 6V 12V 18V Bluetooth 5.0 MP3 Decoding Board 40W Amplifier Audio DIY MP3 Player Car FM Radio Module TF 3.5mm Mic USB Record Call

6V-18V 2x20W

1. Bluetooth version 5.0

2. Support calls (long press the remote control pause button to answer the call when there is an incoming call).

3. Support 3.5MM head microphone function

4. Support recording. Recording only supports operation in TF mode or USB mode.

(Long press the remote control MODE button to start recording, long press the remote control PLAY button to switch between recording and music playback; when recording, you need to connect a storage device, such as: U disk or TF card;) 5. Support power off memory

5. The power supply voltage supports between DC 6v-18v, and the current is between 1-3A.

6. Can be directly connected to speakers, with power amplifier and decoding functions.

7. Support song format MP3 /WMA / WAV / APE / FLAC

8. Main functions MP3/USB/TF/LINE IN/FM/BLUETOOTH/remote control/

9. Power 40W, stereo 2x20W.

10. Support folder selection and playback. When USB or TF is playing, when there is a folder in the device and there are songs in the folder, press the previous button or the next button twice to select the folder to play the song, and the screen will display F001-F00? and so on, yes? F00 is displayed for each folder? .

3.7V-5V 2x3W

Microphone function

Bluetooth version 5.0

Power supply voltage: 5V (range 3.7V-5V) and current not less than 1A.

Power: 2x3W, and two 3W speakers can be connected at the same time.

Connect the 3.5mm microphone function,

Support calling (long press the pause button to answer the call when there is a call).

Support recording. Recording only supports operation in TF mode or USB mode.

Support power-off memory

Folder switching function

Music format: MP3/WMA/WAV/APE/FLAC lossless music format.

Radio FM frequency: 87.5—107.5mhz.

Introduction of support function: Support MP3/USB/TF/LINE IN/FM/Bluetooth/DC 5V.